...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 84 (kliknij aby zobaczyć)
Take Apart
4 5 6 7
I/O Board - 30 3 Remove the eleven silver-colored screws that secure the I/O shield to the chassis (12 on the left, 3 below the fan, 4-7 at the top, 8, 9, and 11 on the right, and 10 at the bottom.) Pull the controller board with the intact shield from the printer.
11 2 3 8
4
1
9
Note: There may be some resistance from the receptacle connector on the blind side of the board (near the top, just left of center).