PHILIPS 107P20
Instrukcja Serwisowa

8

107P2 CM25 GSIII Go to cover page

OSD Adjustments
2) Press the button until ADJUST SHAPE is highlighted.

2) Press the

button until ADJUST VERTICAL is highlighted.

3) Press the button. The ADJUST VERTICAL window appears. ADJUST POSITION should be highlighted.

3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted.

4) Press the

or

button to move the image up or down.

4) Press the button. The SIDE CURVE window appears. PINCUSHION should be highlighted.

5) When the position is adjusted, press the button to return to MAIN CONTROLS window, or press the to highlight ADJUST SIZE.

5) To adjust the pincushion, press the 6) To adjust the vertical size, press the or button. 7) When the size is adjusted, press the button to return to MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. Smart Help After returning to MAIN CONTROLS . . . . . . to continue to ADJUST SHAPE, press the button until ADJUST SHAPE is highlighted. Next, start with step 3 under ADJUST SHAPE and follow the directions. . . . to exit completely, press the ADJUST SHAPE ADJUST SIDE CURVE ADJUST SIDE CURVE under ADJUST SHAPE allows you to adjust two of the five preset options. These two options are PINCUSHION and BALANCED pincushion. Note: use these features only when the picture is not square. 1) Press the appears. button on the monitor. The MAIN CONTROLS window button

or

button.

6) When the pincushion is adjusted, press the button to highlight BALANCED or press the button to return to the ADJUST SHAPE window.

7) To adjust the balanced pincushion, press the

or

button.

8) When the balanced pincushion is adjusted, press the button to return to the ADJUST SHAPE window. BACK TO MAIN WINDOWS will be highlighted. 9) Press the button to return to the MAIN CONTROLS window, or press the button until ADJUST SIDE ANGLES is highlighted.

Back

Forward