- Technical Data
- Pick - up Connection Diagram
- Motor and Drive
- Pitch Control
- Platter does not Run when Unit is Plugged in and Start Switch Operated
- Platter does not Reach Required Speed
- Rumble in Reproduction
- Correct Nominal Speed Obtained Only at Extreme Settings of Pitch Control
- Tonearm and Suspension
- Replacing the Complete Tonearm and Bearing Assembly
- Replacement of Tonearm
- Tonearm Anti - Skating Device
- Pick - up Head not Parallel to Platter
- Tonearm Guide Mechanism
- Tonearm Lift
- Tonearm Misses Edge of Record
- Tonearm Strikes Record During Change Cycle
- Tonearm does not Move Onto Record when Drop Cycle is Started
- Tonearm Lowers too Quickly when Drop Cycle is Started
- Tonearm Returns to Rest Immediately after Being Placed on Record Manually
- Start Cycle
- Manual Start
- Stop Switching
- Muting Switch
- Record Drop
- Shut - off and Change Cycle
- Shut - off Mechanism
- Platter Stops after Automatic Set - Down of Tonearm
- The Last Record of a Stack Keeps Repeating
- After Adjusting the Tonearm Set - Down Point for 7" Records the Set - Down Point is not Correct for 12" Records
- Record Drops when Unit is Switched to "Stop"
- Records do not Drop
- Stylus Slips out of Playing Groove
- Vertical Tonearm Movement Restricted During Set - Down
- Disturbing Noises During Change Operation
- No Sound
- Motor does not Shut - off
- Acoustic Feedback
- Spare Parts with Exploded Views
- Lubrication
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
;
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
;
Documentation made available quickly and It is good quality. Thanks.
|
