Description of the appliance Description of the appliance
The selector dial can be turned either clockwise or anticlockwise. During the last hour, the remaining time is displayed every 5 minutes. Position E corresponds to ENERGY SAVING programme at approx. The delayed start function cannot be used with the SPIN (Schleudern 67°C for normally soiled laundry, extended washing time (cannot be u. Schonschleudern) or PUMP OUT (PUMPEN) programmes. you wish to cancel the delay, until the symbol 0 h is displayed. ON/OFF button (EIN/AUS) Press this button to switch the machine on. Press it again to switch the Then press the START/PAUSE button again. To alter or cancel the preset delay, press the START/PAUSE button, then combined with STAIN/FLECKEN and QUICK/KURZ). press the DELAY START button until the required time is displayed or, if
Mains-on light
This light comes on when the ON/OFF button is pressed, and goes out DRYING TIME button (Trockenzeit)
When the delay is cancelled, the display shows the duration of the wash machine off. programme previously selected.
By depressing this button you can select the desired drying time when it is pressed again. according to the fabrics (cotton or synthetics) you have to dry. To select the drying time you have to push the button until the drying START/PAUSE button This button has three functions: time you want appears in the display. a) Start For COTTON you can select a drying time from 10 minutes to 2 hours After having selected the required programme, press this button to start and 10 minutes (2.10). For SYNTHETICS you can select a time from 10 minutes to 1 hour and machine; the corresponding pilot light stops flashing. b) Pause 40 minutes (1.40). To interrupt a programme which is running, press the START/PAUSE button: the corresponding pilot light and the light of the programme Programme Option buttons phase which is running will start to flash. Depending on the programme, different functions can be combined. To restart the programme from the point at which it was interrupted, These must be selected after choosing the desired programme and press the START/PAUSE button again. before depressing the START/PAUSE button. c) Empty out water When these buttons are pressed, the corresponding pilot lights come on. At end of a programme which ends with water in the drum (SP�LWhen they are pressed again, the pilot lights go out. STOP option), or after �soak� programme (Einweichen), press the If an incorrect option is selected, the pilot lights flash for about 3 seconds START/ PAUSE button to empty out the water: after the soak programme, and the message Err is displayed. the machine will empty only; after SP�LSTOP programmes, the machine will empty and spin. STAIN (FLECKEN) (extended main wash with time optimised stain action phase, not selecDELAY START button (Zeitvorwahl) The wash programme can be delayed from 1 hour up to a maximum of table for wool or programmes with temperatures lower than 40°C). 19 hours. The button must be pressed after selecting the programme and QUICK (KURZ) before pressing the START/PAUSE button. By pressing this button the washing time is reduced. For use when The figures indicating the delay appear for about 2 seconds in the diswashing lightly soiled laundry. play next to the button. The duration of the selected wash programme This option is not available with the wool programme. is then displayed. One minute after depressing the START/PAUSE button, the machine starts its hourly countdown. 12 13 To treat heavily soiled washing or stained washing with stain remover
