|
Dla tego produktu nie napisano jeszcze recenzji!
Timers (continued)
ON Timer:
Automatically turns power on after the set length of time has passed. I Setting the On Timer
$
1 4 7 2 5 8 0
CH CH
TV/VIDEO
! Press the TIMER button 3 times
and the ON display appears.
3 6 9
@ Press the VOLUME UP ( ) or
DOWN ( ) button to set the time. (Maximum time that can be preset is 12 hours and 50 minutes.) In this state, the Timer starts to count down.
@
FUNCTION TIMER PICTURE
!,#
SYSTEM NORMAL
TV
# When you have finished setting
the time, press the TIMER button. The on-screen display will disappear and the Timer function is turned on.
(TV set)
$ Press the STANDBY/ON (B)
button to put the TV set into Standby mode. (POWER indicator will flash to indicate On Timer is set.) When the preset length of time (in the above example, 9 hours and 20 minutes) has passed, the power turns on and a picture appears on the screen.
39 PAL
B/G
POWER indicator (Flashing)
� To cancel the On Timer, press the NORMAL button during the On Timer mode. � The minute setting of the timer is in 10-minute units. � Always use the STANDBY/ON (B) button on the remote control to turn off the power. The On Timer setting is cancelled if power is turned off using the POWER (X) switch on the TV set. � The Off Timer is automatically set to turn the TV set off in 2 hours, if the TV set is turned on by the On Timer. To cancel the Off Timer, press the NORMAL button during the Off Timer mode. � The picture which appears on the screen, having been turned ON by the On Timer, is set at the channel and volume prior to Standby mode. � If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated and the TV set returns to normal mode.
16
|
