Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
2.
PLAY BACK
Tape position/Index search
I
1 Insert a cassette into the cassette slot. 2 Press the GPLAY play back button. 3 Picture search: Now press the
H
(rewind) or
(wind) button once or several times.
4 Interrupt: Press the
STOP h
Tape position: If you press the OK button the tape position will be shown in the display during Wind, Rewind, Record, Play back and Pause/Stop. Index search: Every time you start to record, the tape is
button.
H
5 Wind: Stop the tape and press the
I
(rewind) or the
marked with a code mark.
1 Press the
INDEX E
(wind) button.
J
button. Press the
H
I
button to
6 Eject: Press the
button on the set.
select the next code mark or the previous code mark.
button for the
Note: Some functions switch off automatically after a while (e.g.: Pause, Still Picture, Scanning). This helps to protect the cassette and prevent unnecessary power consumption. * With this set you can play back cassettes that have been recorded on another TV combi in the NTSC standard. * If you load a cassette with erase protection, the TV combi starts the play back automatically. * The picture quality is affected during scanning. The sound is switched off. * Remove the cassette before transporting the TV Combi.
2 Once the TV Combi finds the code mark or unrecorded
area it will automatically switch to play back. Note: When you press any tape transport button (e.g.: the H or I button) this search function will be stopped. * You cannot use this function with recordings made on another video recorder that does not have this function.
Eliminating picture interference
1 During playback press the
MENU
button.
Still picture
1 Press the
2 Select and confirm the �SPECIAL� line. 3 Select the �TRACKING� line.
button. You see a still picture. Interference stripes will appear. Each time you press the STILL R button again the picture will move on one step.
STILL R
4 Press the
or quality is at its best.
MENU
D
C
button until the playback
5 Press the
button. This setting will remain until you remove the cassette.
MENU
Continuous playback
1 Press the
MENU
6 Cleaning function: Press the
button.
7 Select and confirm the �SPECIAL� line.
button.
8 Select the �CLEANING� line. 9 Press the
OK
2 Select and confirm the �SPECIAL� line. 3 Select the �REPEAT PLAY� line. Switch on the continuous
button. A blue screen appears for a few
seconds.
0 Wait until the blue screen disappears and press the
playback.
4 Press the
MENU
button.
MENU
button.
5 Start the continuous playback with the GPLAY playback
Note: * Some hired cassettes may have a poor picture/sound quality. This is not a fault in your set.
button.
6 If you want to cancel the function, stop the continous