PHILIPS 14PV184/05
Instrukcja Obsługi

3.

RECORD
Programme a recording
button to select the programme number The set needs the following information for every programmed recording: * the date on which the recording is to be made * the programme number for the TV channel * the start and end time of the recording * VPS/PDC on or off The set stores all the information mentioned above in what is known as a TIMER block. It can store 6 TIMER blocks for up to one month in advance.

1 Insert a cassette. 2 Use the
Pp

from which you wish to record, e.g.: �P 01� .
3 Press the RECORD n button. 4 Use the
STOP h

button to stop the recording.

5 If, whilst recording, you want to switch off the TV screen,

press the STANDBY m button once. To switch the TV screen on again, press the button.

Pp

Important notes for recoding
� OTR: If you do not want to record to the end of the cassette, press the RECORD n button again. The display shows at what time the recording will stop. With the D or the C button you can change the end time of the recording in 30 minute intervals. If you wish to cancel the end time, press the CLEAR button. This does not effect the recording. Programme number �E1� is provided for recording from external sources (via the EXTERNAL scart socket). Programme number �AV� is provided for recording from external sources (via the front socket). Erase protection: So that you don�t accidentally delete an important recording, you can remove the special tab (erase protection) on the narrow side of the cassette with a screwdriver or slide the special tab to the left. Later, if you no longer want the cassette to be erase protected, you can seal the gap again with adhesive tape or slide the special tab to the right. Auto-assembling: You can use the auto-assembling function to join individual recordings without any major picture disturbance between the recordings. Search for the correct position on the tape and then stop the playback by pressing the STOP h button. �PAUSE� appears in the display. Now start recording as usual by pressing the RECORD n button. Long play: Before recording, press the MENU button. Select and confirm the �SPECIAL� line. Select and confirm the �TAPE SPEED� line. Select the �LP� (=LongPlay) recording speed and stop by pressing the MENU button. During playback the TV Combi will automatically select the correct playback speed.

�VPS� (Video Programming System)/ �PDC� (Programme Delivery Control)
With �VPS/PDC�, the TV station controls the start and the duration of a programmed recording. This means that the video recorder switches itself on and off at the right time even if a TV programme you have programmed begins earlier or finishes later than expected. Usually the start time is the same as the �VPS/PDC� time. If, however, a different �VPS/PDC� time is given, e.g.: �20.15 (VPS/PDC 20.14)�, you have to enter �20.14� (the �VPS/PDC� time) exactly to the minute. If you are not using �VPS/PDC�, the �VPS/PDC� indication must be off.

� � �

�

�

6