Johnson Millennium
Section - 2 Setting Up
�When the Tone controls are used, the display will appear as follows on page 2 of the Amplifier module when the Millennium is in Edit mode:
a:gain lvl
B:GAIN LVL
3. 70
LINK CHANGED EQ GATE DIGITAL
2
USER
1
. 40
2
WAH
. 50
TUBE
4
. 70
L/R OUTS
LINK CHANGED
LINK CHANGED
LINK CHANGED
BANK PAGE
2 OF 5
�Using the <Page> knob turn to page 4 and the display will appear like this:
CHN B:TREB
MID
3
EQ GATE DIGITAL
BASS
4
2
LINK CHANGED
2
WAH
25 .
TUBE
. 25
25 .
L/R OUTS
LINK CHANGED
LINK CHANGED
LINK CHANGED
USER
BANK PAGE
4 OF 5
Amplifier Model and Channel Selection
Selecting Amplifier types in the Millennium is as easy as pushing a button. To call up any one of the Amplifier model types, simply press one of the six buttons in the <Amplifier Modeling> button array, or turn the <2> when the Millennium is in edit mode on page 1 of the Amplifier module. Subsequent presses of any one of the Amplifier model buttons will move you through the selected Amplifier model menu. A-B channel switching can be achieved within the Amp model by pressing the <Channel> button, or turning the <4> button while the Millennium is on page 1 of the Amplifier module in edit mode. Always remember to save any changes.
Amplifier Contour Control
Using the <Contour> knob will give you the ability to control the tonal qualities of the Power Amp section of the Millennium. When the <Contour> knob is turned all of the way down, the power amp tone is flat. Turning up the knob brightens up the signal in the Power Amp section.
Digital Effects
Wet/Dry Mix Adjustments Global or Local
To change the mix of dry and wet signal of the overall effect level, use the <Mix/Page> knob. Mix settings range from 0 (all dry) to 100% (all wet) when the Millennium Wet/Dry mix is set to Local. When the Wet/Dry mix is set to Global (setting the Wet/Dry mix either Local or Global is done on page 2 of the Utility menu), the mix control effects the percentage of Wet/Dry mix in every preset. As the acoustics of any room change, you can easily adjust the mix of your effects accordingly with the turn of a knob. The Master Mix of each preset can be modified in the Master Mix menu while in edit mode by pressing the <Edit> button then scrolling through the Preset pages until the the L/R Out and speaker icons blink.
User Guide
17
