Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 2 (kliknij aby zobaczyć)
Installing your television set
&
Positioning the television set
5 cm
�
Remote control
5 cm
5 cm
Place your TV on a solid, stable surface, leaving a space of at least 5 cm around the appliance. To avoid accidents, do not put anything on the set such as a cloth or cover, a container full of liquid (vase) or a heat source (lamp). The set must not be exposed to water.
Insert the two R6-type batteries (supplied) making sure that they are the right way round. The batteries supplied with this appliance do not contain mercury or nickel cadmium. If you have access to a recycling facility, please do not discard your used batteries (if in doubt, consult your dealer). When the batteries are replaced, use the same type.
Connections
� Insert the aerial plug into the : socket at the rear of the set. If you are using an indoor aerial, reception may be difficult in certain conditions.You can sometime improve reception by rotating the aerial. If the reception remains poor, you will need to use an external aerial. � Insert the mains plug into a wall socket (220-240 V / 50 Hz).
�
Switching on
To switch on the set, press the on/off key. A red indicator comes on and the screen lights up. If the television remains in standby mode, press P # on the remote control. The indicator will flash when you use the remote control.
T
The keys on the TV set
The television has 6 keys located on the front of the set. The ; key switches the TV set on and off. The � key opens and closes the DVD player. The VOLUME - + (-�+) keys adjust the sound. The - + select the programmes. To access the menus simultaneously press the � - and � + keys.The P - + keys select a setting and the � - + keys make adjustments. To quit the menu displayed, press the two keys � - and � +. Note: when the childlock is active, the keys are deactivated (see p. 7).
