Connecting peripheral equipment
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
Video recorder
EXT 1
VCR
Carry out the connections shown opposite, using a good quality euroconnector cable. If your video recorder does not have a euroconnector socket, the only connection possible is via the aerial cable.You will therefore need to tune in your video recorder's test signal and assign it programme number 0 (refer to manual store, p. 6). To reproduce the video recorder picture, press 0. Video recorder with decoder Connect the decoder to the second euroconnector socket of the video recorder.You will then be able to record scrambled transmissions.
Other equipment
Satellite receiver, decoder, CDV, games, etc. Make the connections as shown opposite.
EXT 1
Front panel connectors
(only available on certain versions) Depending on the versions, the connectors are located on the front (sometimes under a flap) or on the right-hand side of the TV set. Make the connections as shown opposite.With the key, select AV. Headphones When headphones are connected, the sound on the TV set will be cut.The @ P # keys are used to adjust the volume level. The headphone impedance must be between 32 and 600 Ohms.
4 7
5 8 0
6 9
Y
To select connected equipment
Press the key to select EXT1 and AV for the side connections (if available). Most equipment (decoder, video recorder) carries out the switching itself.
