Analogue manual tuning
The television can be tuned-in manually using INSTALL. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
Manual tuning
To allocate a programme position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film into the media recorder and press PLAY, then manually tune. Press MENU and using the Up or Down button select INSTALL menu. By pressing Up or Down button, select Programming option and press Right button. Using the Down button select Programme and key in the programme position to be tuned with the number buttons, we suggest Programme 0 for a media recorder.
QSPBS6HHDIB Q��t�h��r�����������������������������������������# 7h�q������������������������������������������������T 8uh��ry�����������������������������������������" T�h�qh�q���������������������������������������7B 8�y����T���r�����������������������������Q6G 7hpx)�Hr�����������������������������@�v�)�@�v�
Use the Down button to select Search then press the Left or Right button to search. The television will begin searching for channels. Each signal will show on the television, if it is not your media recorder press the Left or Right button to restart the search. When your media recorder signal is found, save the selection by pressing the Down button until Store is highlighted, then press the Left/Right or OK button to save. Repeat for each programme position to be tuned then press EXIT to finish. Note: Press to select between TV or DTV.
