PHILIPS 21PV320/05
Instrukcja Obsługi

Manual TV channel search
In certain cases the �Automatic TV channel search� may not be able to find all of the TV channels (e.g. coded TV channels). In that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main

h If you want to change the automatic tv channel setting,

select the line �Fine tuning�. With the D or C button you can vary the automatic tv channel setting. Important: This re-tuning is only necessary and useful in special cases, e.g.: when there are stripes on the picture with cable-TV systems.
i Press the OK button to store the TV channel.

menu will appear.
b Select the line �Installation� with the B or
A

D If you want to search for further TV channels, start again at step e.
j To end, press the MENU button.

button and confirm with the

C

button.

c Select the line �Manual store� with the B or
A

button and confirm with the

C

button.

Satellite receiver
You can receive channels from the satellite receiver via the scart socket EXT.1 . To do this, select the channel number �E1� with the qP r button. You will have to select the channels to be received by the satellite receiver on the receiver itself.

MANUAL STORE

Channel/Frequency FREQU. Search 125 Fine tuning (,,,,,,n=,,,,,,$ Name edit xxx Programme number 01 Decoder OFF

ã Exit: « press MENU

d In the line �Channel/Frequency�, select the

display for: �FREQU.�: frequency �C CH�: channel �S CH�: special channel
e If you know the frequency or channel of the desired TV

channel, you can enter the data in line �Search� with the digit buttons 0-9 . D If you don�t know the frequency or channel of the TV channel of your choice, press the C button to start the channel search.
f In the line �Programme number� select the

programme number you want e.g.: �01�, using the C button.

D

or

g If you want to change the TV channel name, press the
C

button in line �Name

edit�.

E Select the character you want to change with the D or the C button. Change the character with the B or the A button. Select the next character in the same way. E To confirm the information, press the 6
OK

button.