USING THE BLOWER To blow away debris on the ground
Fitting the blower tube and nozzle on the blower
!
WARNING! When fitting the blower tube and nozzle, the engine must be switched off and the stop switch must be in the stop position. 15
The blower tube and nozzle have a bayonet mount. Fit them in the following manner: 1. Press the blower tube (15) against the blower air outlet and turn it 90 degrees until a snap is heard. 2. Fit the nozzle (14) onto the tube (15), and turn it 90 degrees until a snap is heard.
14
Blowing
Before you begin blowing, put on the required safety equipment. WARNING! When working with the blower, wear the required protecting equipment: 1. 2. 3. Hearing protection. Eye protection. Face mask in dusty environments.
!
When operating the blower, the blower must be secured to the shoulder strap. The strap should be worn over the shoulder as shown in the adjacent figure.
