TOSHIBA 28N23B
Instrukcja Obsługi

� AUTO This allows to change the picture mode automatically, according to the transmission of the selected channel. For example, your TV is 4:3 mode, but the transmission of that channel is in 16:9 mode. If you select the AUTO mode, the TV is switched to 16:9 mode automatically. If the TV is in 4:3 mode and the picture ratio of the channel is also 4:3, there will be no affect selecting the picture mode to AUTO mode. WSS (WIDE SCREEN SIGNAL) feature is only used in TV, F-AV, RGB and SVHS modes. For the Picture Mode selection in AV-1 and AV-2 the pin 8 (of Scart) value is used. In TV, F-AV, RGB and SVHS modes the Picture Mode can be �AUTO�, 4:3, 16:9 (Auto mode is not available AV-1 and AV-2.). When the menu appears on screen, picture mode will automatically change to its default tube mode (4:3 or 16:9) but it will turned to its stored mode when the menu disappears.

Sleep Timer As you enter the Feature menu, SLEEP TIMER will be the first selected option. Use � � or � � button to change the Sleep Timer values between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00, 1:15:00, 1:30:00, 1:45:00 and 2:00:00. It is displayed on the upper right of the screen. If sleep timer is activated it is displayed with the TV status and erased with it after 3 seconds.

To Store the Settings Press �OK� button to store picture menu settings in picture menu or press � � or � � button on store option to store picture menu settings.

If there is left only one minute of the down counting of the timer, it is displayed automatically on the upper right of the screen, and stayed there until finishing. Then TV goes automatically to stand-by. Child Lock You can use this feature to prevent children turning on TV or changing programs or adjustments etc. without remote control. The CHILD LOCK feature can be set by � � or � � button to either ON or OFF. When OFF is selected, there will be no difference in the operation of your TV. When ON is selected, the TV can only be controlled by the remote control handset. In this case, the front panel buttons (except the Switch On/Off button) will not work.

Feature Menu
� To enter the Feature menu directly, press the �YELLOW� button, or � Press "MENU" button, now you are in Main menu. In the Main menu, select FEATURE using � � or � � button. Then enter the Feature menu pressing � � or � � button.

While the CHILD LOCK is ON, pressing any of the front panel buttons (except switch on/off

ENGLISH - 11 28N23B-7212&ENG-2143-AK37-UK-50045668.p65 11 12.05.2006, 11:59