PHILIPS 32FD9954/69S
Instrukcja Obsługi

1015.5 en

12-11-2003

11:12

Pagina 3

Use of the remote control
VGA

press repeatedly to select your computer connected to the VGA 1 or 2 connector or to the DVI-D connector.
AV1, AV2, AV3

press to select the peripherals connected to the connector indicated on the monitor. Note: in case the monitor is operating in combination with an electronic receiver box, the AV inputs on the monitor will be disabled and the VGA2 connector becomes an output.
VGA AV1 AV2

POWER

B
AV3

to switch to standby or on again

B

BRIGHTNESS

CONTRAST

ZOOM ON/OFF

ZOOM IN

ZOOM OUT

MENU

to switch the menu on/off cursor buttons to select your choice and to alter a selected adjustment.

MENU

OK

BRIGHTNESS +/-

OK to activate your choice

to adjust the brightness level of the picture
CONTRAST +/-

to adjust the contrast level of the picture
V
ZOOM ON/OFF

MUTE

V press - or + to adjust the volume
CH/PR

¬

to activate/de-activate the zoom function. See p. 5.
ZOOM IN/OUT to adjust the zoom factor

¬ Mute button Mute the sound or restore it

1 4 7
AV MUTE

2 5 8 0

3 6 9
q

CH/PR Program selection To browse through the sources selected.

and to change the magnification of the picture when zoom is activated. See p. 5.

AV MUTE to mute the picture and the

sound or restore it (if the monitor is used in monitor mode). When activated a green indicator starts blinking in front of the monitor. q Picture format See Picture 2 menu, p. 5. Press the q button to switch between the different picture formats.

On screen information When the monitor is used in the monitor mode, information about the active source (AV1, AV2, AV3, VGA1, VGA2 or DVI-D), and the supported video,VGA or HD-format of the selected source is displayed on the screen together with the selected picture format and icons informing about selected sound mode and AV or audio mute.

Use of the remote control

3