4. Fasten the wall-mount unit securely to the wall. G Clamp to two or more of the long slotted holes in the upper and lower parts of each wall-mounting metal in a well-balanced manner.
cutout
5. Dressing the cables G When passing the plasma TV power cord and signal cables behind the plasma TV, use wire clamps, etc., to prevent cable damage.
Mount on a firm, solid surface. Wall-mount metal (top)
Wall-mount metal (bottom) Use the washers provided as necessary.
Wire clamps
Mounting the TV-mount metals on the plasma TV
1. Remove the stand. x Place a protective sheet cover on the top of a table and place the plasma TV on the cover with the back side upward. � Remove the 4 EMI ground screws. (for CL32-PD2100 only.) � Remove the 4 or 5 (CL37-PD2100) screws fastening the stand and remove the stand in the direction indicated by the arrow mark.
Remove the 4 screws Remove the 4 EMI ground screws.(CL32-PD2100)
2. Installing the TV-mount metals
CL32-PD2100
IFasten the two TV-mount metals to the back of the
plasma TV with 4 M6 x 18 screws.
4 M6 x 18 screws TV-mount metal
Plasma TV
The 3rd TV-mount metal hole
Remove the screws (CL37-PD2100)
Table Stand Protective sheet cover
The 4th TV-mount metal hole
