TOSHIBA 32YT56
Instrukcja Obsługi

Analogue manual tuning continued, fine tuning
The television can be tuned-in manually using INSTALLATION. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.

2

Using Q select PROGRAMME then press R and key in the programme position to be tuned with the number buttons, we suggest Programme 0 for a media recorder.
INSTALLATION PROGRAMME BAND CHANNEL STANDARD DECODER FINE TUNING SEARCH TUNING MODE 00 C 28 I

9

The television will also search by frequency. Select FREQUENCY as the TUNING MODE.
INSTALLATION PROGRAMME FREQUENCY 02 527.18 MHZ I SEARCHING FREQUENCY

f

STANDARD DECODER SEARCH TUNING MODE STORE

z
CHANNEL

zx

x
e

SEARCHING

10

Select the PROGRAMME position number, then enter the FREQUENCY number. Highlight SEARCH and press R. To save the selection press Q until STORE is highlighted, then press R. NOTE: If the decoder is connected to the television by SCART lead to EXT2, the DECODER option in the INSTALLATION menu must be selected.

3

Use Q to select SEARCH then press R, SEARCHING will flash and the television will begin searching for channels. Each signal will show on the television, if it is not your media recorder press R to restart the search. When your media recorder signal is found, save the selection by pressing Q until STORE is highlighted, then press R to save. Repeat for each programme position to be tuned then press EXIT to finish.
INSTALLATION BAND CHANNEL STANDARD DECODER FINE TUNING SEARCH TUNING MODE STORE CHANNEL C 28 I

11

4 5

Fine tuning
FINE TUNING should not be required unless there is interference or a weak signal. It is only available when the tuning mode is set to channel.

f

1 2

Select the programme position, then press MENU and select INSTALLATION. Using Q highlight FINE TUNING, then use S or R to adjust to get the best picture and sound. To save the selection press Q until STORE is highlighted, then press R.
INSTALLATION BAND CHANNEL STANDARD DECODER FINE TUNING SEARCH TUNING MODE STORE C 28 I

z

zx

x
e

3

6

If the channel number is known the television will search using this information. Using R select CHANNEL as the TUNING MODE. Select the PROGRAMME position number as in Step 2, then enter the CHANNEL number. Highlight SEARCH and press R. To save the selection press Q until STORE is highlighted, then press R.

f

7

z
CHANNEL

zx

x
e

8

11