SETTING THE REMOTE CONTROL TO OPERATE ACCESSORY DEVICES
T
he Auto Search Method of programming the remote control can take several minutes to complete. So before starting, it is recommended that you seat yourself in a comfortable position at least six feet from the accessory device. You will have to hold the remote so that it is pointed at the front of the device for the entire time the search is taking place.
Satellite Receiver
07
08
1 2
Turn the accessory device ON using the devices power button. Press the desired MODE button that corresponds to the type of device you wish to operate. (CBL, VCR, AMP, HD, SAT, DVD, or CD) A green light will indicate the mode labeled on the top of the button, while a red light will indicate the mode labeled on the bottom of the button. If needed, hold the button down and the light will toggle between the green and red settings.
1
Cable Converter
09
06 06
07
09
07
08
VCR
09
4 2 4 5
3 4
Press and hold the NUMBER 1 and 3 buttons at the same time until the backlight and selected mode buttons light up. Then, release both buttons. Press and release the red POWER button on the remote control. The backlight buttons will turn off.
The remote will start the Auto Search of all available codes, sending a command to channel up. The backlight will blink after each code is tried. (For devices such as DVD or CD players, insert a disc and press PLAY on the device. The remote control will send a command to switch to the next track. Switch AV receivers to the tuner function.) IMPORTANT: Watch the channel indicator of your accessory device closely. Once the right code is found the channels on your device will start to scan up.
ACITVE SOUND CONTROL PICTURE
3
ZOOM
3
5
Press and release the red POWER button on the remote control as soon as the channels start to change. The backlight buttons and selected mode button will blink twice to indicate the Auto Search code setup is complete.
Note: if any other buttons are pressed during the procedure, the Auto Search will end. Remember, Auto Search can take several minutes to complete. Please be patient.
55
