Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
Removing
the
crispers
and crisper
cover
Pull out to the stop, lift the front and pull again.
To remove the crispers: 1. Slide the crisper straight out to the stop.
2. Lift the front. 3. Slide out the rest of the way. 4. Replace in reverse order.
To remove the cover:
1. Push up glass insert from the bottom, then slide it out with both hands. 2. Lift front of cover frame. 3. Pull cover frame up and out. 4. Remove metal cover support.
To replace the cover: 1. Replace metal cover support on wall
supports in front section of cabinet. 2. Fit back corner of cover frame into notch supports on walls of refrigerator, then lower front onto metal cover support. 3. Slide back of alass insert into cover frame. Then lower front to level position.
Remove the glass insert. Lift front of cover frame, then the back.
Removing
To remove the shelf:
the freezer
shelf
1. Lift front of shelf slightly.
2. Lift back of shelf off supports. 3. Replace in reverse order.
Using
the
ice cube
trays
If cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The longer cubes are stored, the smaller they get.
To remove ice: 1. Hold tray at both ends.
