QMS 4060
Instrukcja Obsługi

Replacing the Drum Unit and Transfer Charger 7 8 Turn lever b1 to the right to unlock the internal components. Use the drum handles on top and front to pull out the old drum unit. Lever b1

LTR

9

Carefully set the old drum unit aside for now.

10 Remove the bag containing the new drum unit from the maintenance kit. 11 Open the protective aluminum bag by tearing open the top (there�s a notch on the bag to help you start tearing the bag). » Note: After removing the drum unit from its protective bag, do not touch the OPC drum on the unit because it may deteriorate the drum and reduce print quality. Also, we recommend that you keep the bag for use if you should have to remove the drum from the printer.

2-38

QMS 4060 Print System Operation