Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 5 (kliknij aby zobaczyć)
SURFACE COOKING
Your new range is equipped with automatic ignition top burners. Each burner can be controlled to provide heat from the highest "full on" to the very low "keep warm". The burner knob can be set on any position for the flame desired.
SURFACE BURNER CONTROLS
The knobs that turn the surface burners on and off are located on the lower control panel in front of the burners. The two knobs on the left side control the left front and left rear burners. The two knobs on the right side control the right front and right rear burners. Griddle Control (Optional on some models) 7
f--
Oven Control
/
/
TO LIGHT A SURFACE BURNER
PILOT IGNITION MODELS: Push the control knob in and
ignites, turn the knob to adjust the flame size. SPARK IGNITION MODELS: Push the control knob in and turn it to the LITE or START position. You will hear a little clicking noise - the sound of the electric spark. After the burner ignites, turn the knob to adjust the flame size. NOTE: ALL IGNITERS WILL SPARK WHEN ANY CONTROL IS TURNED ON.
I
FOR BEST RESULTS
I
V9 The gas burner adjusts to any flame desired and allows you to tailor the flame to fit any pan large or small. Always position the utensil on the burner grate BEFORE lighting the burner. FOR YOUR SAFETY, the flame should not extend beyond the sides of the pan. -5_ '-_-__ .f " _'_l 7? '_/ "f
/
I
I/"- "
I
OR FIRE DO NOT LEAVE THE SURFACE BURNERS UNATTENDED WHILE IN OPERATION. GREASE AND SPILLOVERS CAN IGNITE CAUSING A FIRE. WARNING: TO AVOID THE RISK OF SERIOUS INJURY, PROPERTYDAMAGE
