REAR/SIDE VIEW
POWER CH + CH CURSOR
IEEE1394 PHOTO
IEEE1394 DV INPUT
VOL + VOL /
G-LINK
INPUT/EXIT
INPUT 5
MENU/SELECT
MENU/SELECT button This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serves as the SELECT button when in MENU mode.
PHOTO INPUT
Insert USB cable from your Digital Camera, USB memory or memory card USB drive to view your digital still pictures (see pages 28-29). INPUT/EXIT button Press this button to access the INPUT menu. Press again to exit the MENU mode. CHANNEL selector Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the cursor down ( ) and up ( ) buttons when in MENU mode. VOLUME level Press these buttons to adjust the sound level. The volume level will be displayed on the TV screen. These buttons also serve as the cursor left ( ) and right ( ) buttons when in MENU mode.
POWER button Display Monitor �MAIN POWER� button This power button is for the complete system, and must be turned ON/OFF manually. It is recommended to leave the �MAIN POWER� to ON condition (lights red) for stand-by mode.
AUDIO VIDEO S-VIDEO
SIDE POWER button Press this button to turn the Plasma Television ON/OFF. It can also be turned ON/OFF by remote control. The �MAIN POWER� button must be at stand-by mode.
Firmly bind the cables. Thread the band through the square hole.
Hook the band to the claw.
NOTE:
The Rear View of the 55� model is slightly different from the 42� models. One of the differences are the handles that are only present on the 42� models.
DV INPUT
R L/MONO INPUT
First time use
The Main Power button is located on the broadside bottom, under the label �MAIN POWER�.
NOTE:
When the �MAIN POWER� button is set to OFF or the TV is unplugged, the clock will stop and may eventually reset itself.
