Nie masz w koszyku żadnych produktów
|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
 ;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
;
...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
;
Instrukcja Serwisowa jest kompletna i czytelna. Dziękuję!
4080-001
Exit Roller Assembly Removal
1. Remove the input / output tray assembly. 2. Remove all covers, refer to �Covers and Doors� on page 4-3. 3. Remove the carrier frame assembly, refer to the �Carrier Frame Assembly Removal� on page 4-11. 4. Remove the three screws from the right side frame and remove the frame. 5. Remove the exit roller.
Gear Box Assembly Removal
1. Remove the input / output tray assembly. 2. Remove all covers, refer to �Covers and Doors� on page 4-3. 3. Remove the carrier frame, refer to the �Carrier Frame Assembly Removal� on page 4-11. 4. Depress the plastic clip on the clutch lever at the end of the large feed roller shaft and remove the clutch lever. Be sure the grove on the clutch lever aligns with the clutch spring. 5. Remove the two screws securing the gear box assembly to the frame. 6. Depress the gear box clip on the bottom of the left side frame and remove the gear box assembly and shaft.
Large Feed Roller Removal
1. Remove the input / output tray assembly. 2. Remove all covers, refer to �Covers and Doors� on page 4-3. 3. Remove the exit roller assembly, refer to the �Exit Roller Assembly Removal� on page 4-15. 4. Unlatch the spring at the left end of the large feed roller shaft, by lifting up on the latch release lever. 5. Remove the tension spring from the end of the large feed roller shaft and remove the large feed roller.
Repair Information 4-15
|
|
|
> |
|
|
Parse Time: 0.222 - Number of Queries: 132 - Query Time: 0.042
