ZOOM 506II_BASS
Instrukcja Obsługi

PEDAL DEFRET (Pedal Defret)

PITCH SHIFT (Pitch Shift)
This effect varies the pitch of the original sound. You can select one out of nine preset pitch shift patterns (P1 - P9). � P1/P2: A component shifted by 1 octave down is mixed to the original sound. The mixing ratio differs for P1 and P2. � P3/P4: A component shifted by a perfect fifth down is mixed to the original sound. The mixing ratio differs for P3 and P4. � P5/P6: A component shifted by a perfect fourth up is mixed to the original sound. The mixing ratio differs for P5 and P6. � P7/P8: A component shifted by 1 octave up is mixed to the original sound. The mixing ratio differs for P7 and P8. � P9: A slightly pitch-shifted component is mixed to the original sound, resulting in a chorus with slight modulation.

dP

Using the expression pedal (FP01/FP02) connected to the CONTROL IN jack, the defret effect intensity can be adjusted.

BASS SYNTH (Bass Synthesizer)
This effect creates the sound of a bass synthesizer. It is best suited for playing single notes. You can select among nine patterns (b1 - b9) with preset sound character and mixing balance. � b1: Bass synthesizer with fat low end and multiple harmonics (only effect sound is output) � b2: Bass synthesizer with resonant filter (only effect sound is output) � b3: Bass synthesizer with soft sound and few harmonics (only effect sound is output) � b4: b1 effect sound with a slight amount of original sound mixed in � b5: b2 effect sound with a slight amount of original sound mixed in � b6: b3 effect sound with a slight amount of original sound mixed in � b7: b1 effect sound and original sound in 1:1 ratio � b8: b2 effect sound and original sound in 1:1 ratio � b9: b3 effect sound and original sound in 1:1 ratio

b1 b9

P1 P9

Pitch of effect sound vs. original sound Original sound P1/P2: Effect sound Original sound P3/P4: Effect sound Original sound

PEDAL BASS SYNTH (Pedal Bass Synthesizer)

bP
Effect Types and Parameters

Using the expression pedal (FP01/FP02) connected to the CONTROL IN jack, the mixing ratio of b2 effect sound and original sound can be adjusted.

Effect Types and Parameters

o1 o6

OCTAVE (Octaver)

This effect downshifts the sound by one octave and mixes it to the original sound. Higher right-digit setting values result in a higher effect sound ratio.

P5/P6: Effect sound Original sound P7/P8:

o7 o9
oP

OCTAVE > CHORUS (Octaver > Chorus)

This effect type is a serial connection of octaver and chorus. Higher rightdigit setting values result in stronger octaver sound. (Chorus intensity is fixed.) Effect sound

PEDAL OCTAVE (Pedal Octaver)
Using the expression pedal (FP01/FP02) connected to the CONTROL IN jack, the mixing ratio of octaver effect sound and original sound can be adjusted.

PEDAL PITCH DOWN (Pedal Pitch Down)

Pd
PU

Using the expression pedal (FP01/FP02) connected to the CONTROL IN jack, the pitch of the effect sound can be shifted over the range of 0 to -1 octaves.

PEDAL PITCH UP (Pedal Pitch Up)
Using the expression pedal (FP01/FP02) connected to the CONTROL IN jack, the pitch of the effect sound can be shifted over the range of 0 to +1 octave. Turns the MOD module off.

oF
28
ZOOM 506 II BASS

OFF (Off)

ZOOM 506 II BASS

29