Positive pressure on diaphragm produces positive voltage on the RED lead with respect to the BLACK lead
CODED WIRE
WHITE GREEN BLUE CARTRIDGE
SWITCH
Built-in, double-pole double-throw slide switch. Lockplate to lock switch ON
SHOCK MOUNT
+ �
GREEN
BLACK RED
SHIELD 1 2 3 4
GREEN
Internal rubber vibration isolator
CABLE
SWITCH SHOWN IN �OFF� POSITION
XLR Connector
INTERNAL CONNECTIONS
1.2 m (4 ft) extending from mounting flange, four conductors (two shielded), plastic jacketed and 4 pin female XLR connector.
CASE
FIGURE 4 MOUNTING
To mount the microphone on a flat surface, drill a 19mm (.75 in.) diameter hole for clearance of the XLR connector. Place the mounting flange over the hole and attach it to the surface using #8 screws (not included).
Black finish die casting with black enamel diecast grille and stainless steel screen
DIMENSIONS (FIGURE 3)
.85 2.2 cm
FURNISHED ACCESSORIES
1.27 mm (.050 mm) Hex Wrench......................... 80A67
REPLACEMENT PARTS
Cartridge ................................................................ R180 Grille Assembly ..................................................RK334G Cable Assembly, 2.1 m (7 ft)............................. 90B4640 Gooseneck, 609 mm (24 in.).................................. G24B Gooseneck, 686 mm (27 in.).................................. G27B Black Mounting Flange. ..........................................A12B
6.5 16.5 cm
1.5 3.8 cm 4.0 FT 1.2 m
OPTIONAL ACCESSORIES
Black Heavy-Duty Mounting Flange.................. A13HDB Windscreen .......................................................... A1WS For additional service or parts information, please contact Shure's Service department at 1-800-516-2525. Outside the United States, please contact your authorized Shure Service Center.
