speakers to the PTV's sound system, you can create the feeling of reflected sound that surrounds you at a movie theater or concert hall. Connect both external speakers to the speaker wire terminals on the PTV. Recommended speakers: 8 ohm, 15 watt minimum. Be sure the (+) and (-) speaker wires are connected to the correct R(ight) and L(eft) speaker terminals on the TV.
y adding optional external
REAR SURROUND SOUND SPEAKER TERMINALS
BACK OF PTV
SMART HELP
1
SUBWOOFER OUTPUT Use the Subwoofer Output (RCA plug connector) to send the subwoofer audio channel signal (at line level) to an optional external powered Subwoofer speaker. The Subwoofer audio signal is for the playback of only the lowest frequency notes (under 100 Hz).
Remember, Surround Sound will not work with only one speaker connected; or with monaural audio material (unless Variable Audio Surround control is turned ON - see section below).
2
Place the speakers so the viewing area is between the PTV and the rear surround speakers. (See overhead view drawing.)
+
-
+
-
PTV
3
Turn PTV ON and place the STEREO control to the "STEREO IF AVAILABLE" ( ) position.
REAR SURROUND SOUND SPEAKERS
SUBWOOFER
2
Note: The rear Surround Sound speakers will not be heard at the same volume level as the front TV speakers. It is intended for the rear speakers to give a background noise effect which requires a lower volume level than the TV's front speakers. REAR SPEAKER REAR SPEAKER
After setup whenever a stereo signal is received the audio will be heard in Surround Sound.
PRIMARY VIEWING AREA
VARIABLE AUDIO OUTPUT
T
he PTV's Variable Audio Output jacks can also be used
SOUND MENU VARIABLE AUDIO OUTPUT
1
BACK OF PTV
for Surround Sound. Once they are connected to an external hi-fi system its speakers can be used for the playback of Surround Sound.
EXIT
MORE... VARIABLE AUDIO OUTPUT 3 OF 3
STEREO
1
Connect the R(ight) and L(eft) VARIABLE AUDIO OUT jacks on the PTV to the R and L Audio Input jacks on your amplifier or sound system. Turn PTV ON and place the VARIABLE AUDIO OUTPUT on screen control to the SURROUND ( ) position. (Sound Menu 3 of 3). Note:This will change the Left/Right channel audio line level signal at the Audio Output jacks to the same signal found at the PTV's Surround Sound Speaker terminals.
2
SURROUND
EXIT
VARIABLE AUDIO OUTPUT JACKS AUDIO INPUT JACKS
DN
R
mute
L
2
HDR PTV
Menu Source
channel
+
AUX/TV INPUT
volume
PHONO INPUT
+
ok
Exit
3/5 INFO A/CH
2
AUDIO SYSTEM SPEAKERS USED AS REAR SURROUND SOUND SPEAKERS
