Wszystko OK!
Dokumentacja jest czytelna.
Dziękuję.
Tekstowy podgląd strony 20 (kliknij aby zobaczyć)
3. How to Eject Manually
1. Remove the Rear Cabinet. 2. To remove the Loader PCB Holder with the DVD Main CBA Unit, remove three screws (S-7) in Fig. D2. Do not disconnect connectors. 3. To remove the Chassis Cover, remove 4 screws A as shown in Fig. D5. 4. Remove a disc.
Chassis Cover
Disc
Screws A
Fig. D5
Reassembly note of the Chassis Cover: 1. Insert the pin A on the Chassis Cover into the hole A on the Main Chassis as shown in Fig. D6.
Chassis Cover
Pin A
Hole A
Main Chassis
Fig. D6
2. Tighten 4 screws A as shown in Fig. D5.
