Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 8 (kliknij aby zobaczyć)
Using
the SUDS-MISER*
system saves the wash
system
Storagf3 tub Drain hose Standpipe
Your SUDS-MISER
water from both the Regular and Gentle cycles. It does not save the wash water from the Permanent Press cycle. The SUDSMISER system uses two drain hoses: l The suds return hose moves a portion of the used wash water to a storage tub, then back into the washer for use during the next wash. l The drain hose carries the wash water to a standpipe drain or to another tub with an open drain. NOTE: A standpipe drain is available for placement in the drain opening. To order, ask for In-Tub Standpipe, Part Number 89121, from your nearest authorized Whirlpool dealer.
Wash system using one laundry tub and a standpipe
Storyge
tub Drain hose In-tub standpipe
Wash system using one laundry tub and an in-tub standpipe Storage tub
Wash system using two wash tubs
NOTE: The end of the suds return hose has a plastic strainer to prevent objects from being pulled into the washer during Suds Return.
Saving
your
wash
water
1. Turn the Cycle Control Knob to the Regular or Gentle cycle. 2. Place a stopper in the suds storage tub. 3. Pull Cycle Control Knob out.
