Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 16 (kliknij aby zobaczyć)
7610_16_17.qxd
6/6/05
12:39 PM
Page 16
(Zwart plate)
16
ENGLISH
Once A Month: Razor Heads
� Do not mix up the cutters and combs as the shaving persormance may be adversely affected for several weeks before optimal shaving performance is restored.
1
Turn razor OFF, remove the charging plug from the outlet and cord from the razor. Press the razor head release button (1), open and lift off the razor head assembly (2). Turn the center wheel counterclockwise (1) and remove the retaining frame (2). Remove and clean one set of cutters and combs at a time. Separate the cutter from the comb and rinse clean under hot water.
C C
2
3
4
C
5
Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored.
C
6
Replace the set back into the Head Assembly so that the �wings� on the comb fit within the brackets located towards the center of the assembly.
