Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 73 (kliknij aby zobaczyć)
8050QMA N/B Maintenance
6. Remove the two screws and separate the I/O bracket from the system board, then free the system board. (Figure 2-29)
Reassembly
t ent e cr m Se cu c Do al iT ia M nt e d fi n o C
Figure 2-29 Free the system board
1. Fit the system board into the I/O bracket and secure with two screws. 2. Replace the system board into the housing and secure with four screws. 3. Reconnect the three speakers� cables into the system board and replace the (R&L) rear covers. 4. Secure with four screws fasten the housing. 5. Replace the LCD assembly, modem card, DDR, CD/DVD-ROM drive, hard disk drive, CPU, keyboard and battery pack. (Refer to the section 2.3.8, 2.3.7, 2.3.6, 2.3.5, 2.3.4, 2.3.3, 2.3.2 and 2.3.1 Reassembly)
72
