ENGLISH
� The block display in the charge meter indicates how much power is left in the battery.
ENGLISH
15
C
2
Remove battery cover and then use a flatbladed screwdriver to lift out the battery.
Charging Stand Clock To set time
C
3
C
1 2
1
Turn clock module, located on underside of stand, counterclockwise to remove from stand.
Replace battery with 1.5V button cell watch battery, placing rounded side of battery into battery compartment, flat side (+) facing out. Replace battery cover. Replace clock module into stand and turn clockwise to secure in place.
C C
2
4
Press small, left button to set correct time.
2
1
Before first use
C
2 1
3
Replace clock module into underside of stand.Turn clockwise to secure in place.
� Charge the razor before you start using it (see �Charging�). � Remove any sticker or protective foil from the LED Display. Important
To replace clock battery
C
1 2
1
Turn clock module counterclockwise and remove from stand.
� Only use the power plug and/or charging stand provided to charge the razor. � The charging plug transforms 100 � 240V AC to 12V DC.
