PIONEER A-35R
Instrukcja Serwisowa

A-35R

7 DIRECT button/indicator
Use this button when you do not wish to pass the output from input terminal equipment through the various frequency adjusting circuits (BASS, TREBLE, BALANCE, LOUDNESS). On : The indicator lights: The signals passing through the input terminals are reproduced without passing through the various frequency adjusting circuits. This results in flat, pure sound which is a more faithful reproduction of the input source. Off : The indicator goes off: The signal passes through the various frequency adjusting circuits.

- SPEAKERS B (ON/OFF) button/indicator
Use this button to listen to the speaker system connected to SPEAKERS B terminals. ON : The indicator lights. Sound is heard from the speaker system. OFF : The indicator goes off. No sound is heard from the speaker system. Set to this position when listening with headphones.

= PHONES jack
When using headphones, insert the plug into this jack.

8 SB MODE button/indicator
The SB mode is a special mode in which the amplifier does not accept remote control (But all of the facilities can be controled by manual as same as SB mode OFF.). Fix the VOLUME control near the center position. In this mode, the set can be used as a power amplifier which amplifies the LINE/SURROUND BACK input (the function name is LINE/SB) with a input sensitivity of 1 V. For example, when the set is combined with one of Pioneer�s Surround Back compatible receiver, the set can be used as the Surround Back amplifier (For details, please refer to the instruction manual of the receiver.)

NOTE:
The speakers continue to output sound even when headphones are plugged into this jack. To mute the sound from the speakers, press the SPEAKERS button to OFF.

~ SPEAKERS A (ON/OFF) button/indicator
Use this button to listen to the speaker system connected to SPEAKERS A terminals. ON : The indicator lights. Sound is heard from the speaker system. OFF : The indicator goes off. No sound is heard from the speaker system. Set to this position when listening with headphones.

9 TREBLE tone control
Use to adjust the high-frequency tone. The center position is the flat (normal) position. When turned to the right, highfrequency tones are emphasized; when turned to the left, high-frequency tones are de-emphasized.

NOTE:
This control does not operate when the DIRECT button is in the on position.

0 BASS tone control
Use to adjust the low-frequency tone. The center position is the flat (normal) position. When turned to the right, lowfrequency tones are emphasized; when turned to the left, lowfrequency tones are de-emphasized.

NOTE:
This control does not operate when the DIRECT button is in the on position.

31