MOTOROLA A840
Instrukcja Serwisowa

Level 3 Service Manual 2

Disassembly

Removing and Replacing the Keypad Bezel
1. 2. Remove the battery cover, battery, and antenna, as described in the procedures. Turn the phone over and carefully insert the disassembly tool under the keypad bezel and gently bend the bezel outward from the rear housing to release the 2 snaps on the side of the housing (See Figure 13).

2 snap locations each side

keypad bezel

040346o

Figure 13. Removing the Keypad Bezel 3. 4. 5. 6. 7. Repeat step 2 for the other side of phone. When all four snaps have been released, carefully lift the keypad bezel away from the phone. To replace, align the keypad bezel with the phone housing. Carefully press the keypad bezel into the phone housing until the snaps engage. Replace the antenna, battery, and battery cover as described in the procedures.

6809485A78-O

June 07, 2004

33