|
|
|
Kto jest w sklepie?
Sklep przegląda 4945 gości i
1 zarejestrowany klient |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
 ;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
;
...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
ADJUSTMENTS
No
ITEMS
SPECIFIED VALUES, CONDITIONS TEST CONDITIONS, REFERENCES CONNEC STANDARD VALUES RELIABILITY LIMITS TION
> 130g Loading > 130g
6 7
Clamping Force Mechanical Noise
Eject -Test should be performed in no reverberation If anything is not < 75dB(A) error, shall not room at the noise level of less than 20dB(A). Play < 40dB(A) -Test should be performed at the 50cm in front defined. Access < 70dB(A) of the unit. -IHF-A MODE (RMS-FAST)(TCD-792D)
>1.0g/10Hz-20Hz, Z way >2.0g/30Hz-200Hz, Z way >0.6g/10Hz-20Hz, X&Yway >1.2g/30Hz-200Hz, X&Yway X=side to side Y=front to back Z=up to down
8
Anti-Vibrational Performance
-The G level should be upped to the sound skip level from the less level slowly at the Z way only 10Hz-20Hz:0.7g frequency. 30Hz-200Hz:1.2g -Ignore the sound skip at the near of resonance frequency(about 100Hz). -In playing YEDS-10 Tr #5, shall perform with vibration -No sound skipping. -No sound skipping in the specified range. equal with -The sound skipping does not include any standard values interpolating noise.
9
Playability
-Interruption:0.7mm -Block Dot Disc:0.8mm -Scratch Disc:1mm -Finger Print Disc:65um
10 Disc Deflection
+ 0.4mm
+ 0.4mm
-No sound skipping at the ABEX 731RA Tr No8 -The sound skipping does not include any interpolating noise. -Except from specified item due to the reliability limits of TEST DISC in the HTO TEST. -No sound skipping at the ABEX 713 Tr No8 -The sound skipping does not include any interpolating noise. -Except from specified item due to the reliability limits of TEST DISC in the HTO TEST.
11
Disc Eccentricity
+ 0.21mm
+ 0.21mm
12 Jitter 13 14 15 Frequency Response Harmonic Distortion Dynamic Range S/N Ratio Channel
< 28 nsec 20-20kHz + 2dB < 0.03% at 1kHz > 80dB at 1kHz
< 33 nsec 20-20kHz + 3dB This measurement may be done at 20Hz, 20kHz, (1kHz=0dB) < 0.05% at 1kHz 400Hz HIGHPASS FILTER 20kHz(-60dB 24kHz) LOWPASS FILTER > 75dB at 1kHz 20kHz(-60dB 24kHz) LOWPASS FILTER, 60dB AMP IHF-A WEIGHTING FILTER > 85dB at 1kHz > 65dB at 1kHz 400Hz HIGHPASS FILTER 20kHz (-60dB 24kHz)LOWPASS FILTER 10
16 17
> 85dB at 1kHz > 70dB at 1kHz
|
|
|
> |
|
