SONY AC-P700A
Instrukcja Serwisowa

2-2. Fuse Replacement

2-2. Fuse Replacement
B4 x 6

The fuse are mounted the following boards of AC-P700A. n Be sure to turn off the power switch and disconnect the power cable before replacing these fuses. 1. PS-461 board Replace the fuse with following as shown in the parts list of �Sec.4 Spare Parts�. PS-461 board (Ref.No. F1) : Fuse 10 A, 125 V (for J, UC) Fuse 5 A, 250 V (for CE) Procedure (1) Remove the eight screws (+B4 x 6) and remove the outer cover from the AC-P700A. (2) Remove the two screws (+PSW3 x 8) and lift up the PS-461 board with board bracket in the arrow direction. (3) Remove the fuse from the PS-461 board and replace it with a new one. (4) After replacement is completed, install the fuse cover and outer cover in the reverse procedure of steps (1) and (2). 2. PS-471 board Replace the fuse with following as shown in the parts list of �Sec.4 Spare Parts�. PS-471 board (Ref.No. F1) : Fuse 3.15 A, 250 V (Ref.No. F2) : Fuse 5 A, 250 V

Outer cover B4 x 6

B4 x 6

Fuse (F1) Fuse (F2)

PS-471 board

PS-461 board

Screws PSW3 x 8

Fuse (F1)

2-2(E)

AC-P700A