SETTING A STACK OF ORIGINALS IN THE DUAL JOB FEEDER (ADF, ARDF)
SETTING A STACK OF ORIGINALS IN THE DUAL JOB FEEDER (ADF, ARDF)
You can insert a stack of originals of the same size into the dual job feeder. These originals are individually fed onto and removed from the exposure glass.
� Some originals are unsuitable for the dual job feeder. See page 23. � You can still use originals that are not recommended for this mode. First make a set of copies of the originals by positioning them directly on the exposure glass, then use these copies as originals. � If you want to set originals of different sizes at the same time, use the User Tools. See page 130.
1 Correct any curl, fold, or crease in the originals 2 Make sure theglass isOriginal originals.is lit and Insert indicator the exposure clear of
before setting the originals.
3 Adjust the guide to the original size. 4 Set the originals face up into the dual job feeder
� � � The last page should be on the bottom. The original guide must touch the front side of the originals. Do not stack originals above the limit mark.