Setting one Original at a Time in the Document Feeder
Setting one Original at a Time in the Document Feeder
If you set one original at a time in the document feeder, the second and subsequent originals can be fed and copied automatically without pressing the Start key. Note
� Do not press down or hold originals after inserting them. � While originals are fed from the original table to the exposure glass (platen glass), do not pull them out. � Do not lift the document feeder until the original has been completely fed out.
1 Correct any curl, fold, or crease in the originals 2 Make sure the Insert Original indicator is lit and
nals. the exposure glass (platen glass) is clear of origi-
before setting.
3
Adjust the guide to the original size. until the Insert Original indicator goes off.
TRSR050E
4 Set the original face up into the document feeder
Note
� If you are copying a stack of originals one sheet at a time and you want to keep them in order, start with the last page of the originals. The original guide must touch the front side of the original.
�
5 Press the Start key. 6 While the Auto Feed indicator is lit after an origiautomatically fed and copied. Note
� You can adjust the time the machine waits before being ready for the next original with the user tools. See page 191.
nal is fed, set the next original. The original is
