Schematy są ale można wysilić się i zrobić kolorowy skan i o większej rozdzielczości. Wtedy schematy płytek będą czytelniejsze. Całość super jako wartość merytoryczna. Wszystkie dane potrzebne do podłączenia różnego rodzajów urządzeń takich gramofon, CD itd.
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Tekstowy podgląd strony 2 (kliknij aby zobaczyć)
1 SPECIFICATIONS
Amplifier Section
Output Power .... 50 + 50 watts RMS (0.9 % THD, 1 kHz, 8 ohms) Total Harmonic Distortion.................... 0.05 % (at 45 watts,1 kHz) Input Sensitivity/Impedance .................. PHONO: 4 mV/22 kohms LINE: 270 mV/20 kohms Frequency Response.................... PHONO: 20 Hz�20 kHz, +/�3 dB LINE: 20 Hz�30 kHz, +1/�3 dB Signal-to-Noise Ratio.............................................. PHONO: 60 dB LINE: 68 dB Tone Control .......................................... BASS: +/�9 dB at 100 Hz TREBLE: +/�7 dB at 10 kHz Loudness Control (Volume at �40 dB Position) .............................. +7 dB at 100 Hz, +5 dB at 10 kHz
Voltage Conversion
(General export models only)
FM Tuner Section
(Without notes 98.1 MHz, 65 dBf) Tuning Range .................... 87.5 MHz�108.0 MHz (100 kHz steps) Usable Sensitivity (IHF) ............................................ Mono: 20 dBf 50 dB Quieting Sensitivity................ Mono: 39 dBf, Stereo: 46 dBf Capture Ratio ...................................................................... 2.8 dB Image Rejection Ratio .......................................................... 20 dB AM Suppresion Ratio............................................................ 48 dB Harmonic Distortion (1 kHz) .............. Mono: 0.4 %, Stereo: 0.5 % Frequency Response................................ 30 Hz�15 kHz, +2/�3 dB Stereo Separation (1 kHz) .................................................... 35 dB Signal-to-Noise Ratio ........................ Mono: 57 dB, Stereo: 55 dB Be sure to remove the power cord from the AC outlet before repositioning the voltage converter switch. 1. Locate the voltage selector on the rear panel. 2. Using a flat-bladed screwdriver, set to the appropriate 230V or 120V position according to your area. IN NORTH AMERICA USE ONLY ON 120 V SUPPLY.
AM Tuner Section
Tuning Range .......................... 520 kHz�1,720 kHz (10 kHz steps) Usable Sensitivity ............................................................ 55 dB/m Total Harmonic Distortion .................................... 1 % at 85 dB/m Signal-to-Noise Ratio............................................................ 48 dB
General
Power Requirements.................................. 120 V/230 V, 50-60 Hz Power Consumption ............................................................ 120 W AC Outlet .......................... Unswitched x 1, 100 W max (1 A max) Dimensions (W x H x D) ........................ 17-1/8" x 5-1/8" x 12-5/8" (435 x 130 x 320 mm) Weight (net) .................................................. 15-7/16 lbs (7.0 kg) Standard Accessories .................................. AM Loop Antenna x 1 FM �T� Type Antenna x 1
� Design and specifications are subject to change without notice.
