|
Dla tego produktu nie napisano jeszcze recenzji!
Fixing screws for AG-YA70
6)
Remove the two hexagonal screws for anchoring the AG-YA70 to the motherboard.
7)
Insert the AG-YA70 board.
8) 9)
Insert the cable from the AG-YA70 into the connector on the motherboard. Secure the two screws which were removed in step 6). were removed in step 5).
10) Secure the shield casing and the twenty screws which 11) Reattach the power cable removed in step 4).
When doing so, ensure that the power cable is correctly inserted into the jack.
12) Re-attach the bands removed in step 3) and close the
top unit.
13) Secure the six screws which were removed in step 2). 14) Secure the ten screws which were removed in step
1).
Specifications
Power Source: Power Consumption:
indicates safety information.
DC 5 V, 3.3 V 6.3 W
Operating temperature: Operating humidity: Standard:
41 °F to 104 °F (+ 5 °C to + 40 °C) Less than 80% SMPTE-259M-C standard complied with 2 (E)
ENGLISH
Installation of the AG-YA70
|
