|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
;
Documentation made available quickly and It is good quality. Thanks.
*1 *2 *3 *4 *5 *6 *7
When printing SHARP original data with draft mode. For the Bypass Tray, the maximum paper size is 5-sheeted A4/8.5"x11" banner. Holds up to total thickness of 15mm paper stack. Holds up to total thickness of 5mm paper stack. With 75g/m2 (20lbs.) plain paper. When using 20.3cm x 25.4cm (8"x 10") size paper at 5% image area in normal usage. For this printer�s power supply requirement, see the name plate located on the back of the printer.
[3] DISASSEMBLY, ASSEMBLY
(1) Cabinet
<1> Rear cabinet
1) Remove the Centro cable and the power cable. 2) Open the U-turn paper guide, and remove it.
<2> Main cabinet
1) Remove the rear cabinet. 2) Open the front cover, and remove the screw. 3) Remove the main cabinet upward.
3
2 1
2
3) Remove the screw. 4) Slide in the arrow direction and remove the rear cabinet. 5) Remove the flat cable from the connector.
(2) Operation panel
1) Remove the rear cabinet. 2) Remove the main cabinet. 3) Remove the pawl, remove the panel PWB, and remove the flat cable.
2
1 2
1 3 1
[Note] Caution to pawl.
3
|
