Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 11 (kliknij aby zobaczyć)
SLEEP (See 6) About Sleep This set has a built-in sleep timer, which enables the radio to be automatically switched off after a set period of time. There are four sleep time options. Setting and switching off SLEEP 1 Within 1 second, press ALARM RESET / SLEEP twice until the display shows SLEEP and SL: 60. � The radio is automatically switched on and tunes to the last station. 2 To select other sleep time options, press ALARM RESET / SLEEP again within 1 second before the display returns to clock time. � The display shows in sequence: SL : 30, SL : 15 and OFF. 3 To cancel sleep, press either: � RADIO ON/OFF � REPEAT ALARM / BRIGHTNESS CONTROL. � ALARM RESET / SLEEP once or more until SLEEP disappears from the display. USING THE PROJECTION You may have the experience of looking for a clock in the darkness. With this projection feature, you can conveniently project the clock time onto a surface e.g. walls ceiling (furniture, glasses not recommended). Press PROJECTION ON/OFF to switch on. � The Projection lens lights up red. Turn the Projection lens wheel (maximum 180 degree left or right) and also the set, if necessary, to find a suitable projection surface. (See 7) To change the projected time upside down, press REVERSE PROJECTION. To change the projection slightly to a different angle, turn the ROTATE PROJECTION ball (maximum 60 degree left or right.). Press PROJECTION ON/OFF to switch off. � The Projection lens goes out.
1 2 3 4. 5.
Helpful hints: � When battery-powered, the projection lens lights up briefly to help save energy. � For a longer projection time, please use the supplied 7.5V AC adapter to operate the set.
