Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
Parts and their functions
Left side
1 23 4
1 Microphone intercom switch (MIC)
Used to switch the intercom line between the ON, OFF, and PTT settings. (PTT: Audio transmission continues as long as the switch is held down.)
MIC
ON OFF PTT
INCOM LEVEL
PGM
ON OFF
2 Intercom level knob (LEVEL)
This knob is used to adjust the intercom reception volume level.
3 Program level knob (PGM)
This knob is used to adjust the intercom PGM volume level.
4 Program line switch
This switch controls the program line multiplexed on the intercom line. It has two positions: ON and OFF.
DIGITAL TRIAX
Camera Adapter AJ-
Right side
1 Prompter video output (PROMPT OUT)
The prompter video signal input to the base station (AJBS901) is output from this jack.
2 Return video output (RET OUT)
The return video signal (either RET1 or RET2) input to the base station (AJ-BS901) is output from this jack. RET-1 or RET-2 is selected by operating the return select button (see page 5).
3
PROMPT OUT
1 2
3
Triax connector
This connector is used to connect to the base station (AJBS901) using a triax cable.
