PANASONIC AJ-HD1200AE
Instrukcja Obsługi

Setup (initial settings)
Loading the user defaults Menu protection
By setting the unit to the menu protection mode, the setup menu can no longer be opened even when the LOCAL/MENU/REMOTE switch is set to the MENU position.

1
Set the LOCAL/MENU/REMOTE switch to the MENU position. The unit is set to the menu setting mode, and the menu screen appears on the video monitor.

2

Press the RESET button. The unit is now set to the default setting mode, and the default setting screen now appears on the video monitor. SELECT MODE 2 0 ESCAPE 1 LOAD 2 SAVE 3 PROTECT

1 2

Set the LOCAL/MENU/REMOTE switch to the MENU position. The unit is set to the menu setting mode, and the menu screen appears on the video monitor.

Press the RESET button. The unit is now set to the default setting mode, and the default setting screen now appears on the video monitor. SELECT MODE 2 0 ESCAPE 1 LOAD 2 SAVE 3 PROTECT

3

Press the MENU-UP button or MENU-DOWN button to move the cursor to the LOAD position, and press the SET button. The unit is set to the LOAD mode, and the LOAD screen appears on the video monitor. SET�UP MENU <LOAD> 2 NO FACTORY USER (ALL) USER (NOT SYSTEM)

3
Press the MENU-UP button or MENU-DOWN button to move the cursor to the PROTECT position, and press the SET button. The unit is set to the menu protection setting mode, and the screen prompting the user to confirm the menu protection appears on the video monitor. MENU PROTECT OK? 2 NO YES

4

Press the MENU-UP button or MENU-DOWN button to move the cursor to the USER (ALL) position, and press the SET button. O When the cursor is moved to USER (NOT SYSTEM) and this operation is performed, everything except the SYSTEM menu settings operates according to the user settings stored in the memory. O When the cursor is moved to NO and this operation is performed, the display returns to the menu screen without changing to the user settings stored in the memory.

4

To initiate menu protection, press the MENUUP button or MENU-DOWN button to move the cursor to the YES position, and press the SET button. The menu screen now appears.

5

Set the LOCAL/MENU/REMOTE switch to the LOCAL or REMOTE position. This completes the menu setting procedure.

26