PANASONIC AJ-VNC150P
Instrukcja Obsługi

AJ-VNC150P Encoder/Decoder Board for DVCPRO HD Bank Data
This optional board is installed in the AJ-HD150P digital HD video cassette recorder to enable V-ANC (Vertical Ancillary) data to be recorded in the VAUX (Video Auxiliary Data) area of the DVCPRO HD format and played back.

Features
OThis optional board makes it possible to record V-ANC data on HD-SDI in the VAUX (Video Auxiliary Data) area of the DVCPRO HD format and play it back. O Formats supported: 1080i (59.94 Hz) recording and playback 720p (59.94 Hz) recording and playback

Recording operation 1. Detect the V-ANC data packets which have been multiplexed
in the following range in the HD-SDI Y stream. L9 to L20, L571 to L583 for 1080i/59.94 Hz L9 to L25 for 720p/59.94 Hz <Note> The H-ANC data packets are not detected.

Installation
Consult your dealer about installing this board. The software versions for the AJ-HD150 need to be upgraded. Check to see if the proper versions are running. I/F Ver. 1.04 and up SYSCON Ver. 1.05 and up DV_PB Ver. 1.03 and up AV_DV_REC Ver. 1.07 and up SERVO Ver. 1.03 and up SDI VSi3351D and up

2.

Record the V-ANC data packets in the VAUX area of the DVCPRO HD format in sequence starting with the line that comes first up to the capacity specified below. 1080i/59.94 Hz: 5760 words/frame 720p/59.94 Hz: 2880 words/frame <Note> An input data packet which has been input after the rated capacity has been reached is not recorded or played back.

3.

The HD-SDI video signals are also recorded at the same time. <Note> It is not possible to record or edit the V-ANC data alone.

1.

After turning off the power of the main unit (AJ-HD150), remove the top cover followed by the board clamp.

Playback operation 1. When the VTR is in any of the following operation modes, the
V-ANC data packets are multiplexed on the HD-SDI Y stream and played back at the same time as the video signals. ONormal playback mode OSimultaneous playback mode OEdit playback mode OEE mode <Notes> OIf the VTR is in any other mode such as FF, REW, JOG or VAR, the V-ANC data is muted, and only the video signals are played back. OIt is not possible to play back the V-ANC data alone.

Board clamp

2. 2.
Attach the AJ-VNC150P board to the board in slot F5 of the main unit. <Note> Push the coaxial cable into the space between the F5 and F6 boards.

The recorded V-ANC data packets are multiplexed on the same lines as the ones on which they were previously multiplexed. <Note> During playback involving format conversion, the V-ANC data is muted, and only the video signals are played back.

Specifications
Dimensions (WtH): 3-1/4�t3-15/16� (81.5t100.0 mm) Input/output interface: V-ANC data packet Y stream Formats supported: 1080i (59.94 Hz/60 Hz) recording and playback 720p (59.94 Hz/60 Hz) recording and playback Capacity: 5760 word/frame for 1080i (59.94 Hz/60 Hz) 2880 word/frame for 720p (59.94 Hz/60 Hz)

F5

3.

Install the board clamp, and attach the top panel.