|
Dla tego produktu nie napisano jeszcze recenzji!
AKR 500 AKG 751 - AKG 753
PRODUCT DESCRIPTION
CONTROL PANEL
1 5 A. Selected speed display. B. Speed selector. C. Light switch.
a
4
b
d
2
b
c
3
A
O 1 2 3
B
O
C
I
Fig. 1 1. 2. 3. 4. 5. Control panel. Grease filters (inside the extractor grille). Lighting unit. Pull-out steam deflector. Steam deflector pivot (inside the extractor. hood, at the two ends of the steam deflector).
large amount of steam and fumes medium amount of steam and fumes small amount of steam and fumes
AKR 500
REMOVING AND RENEWING OR CLEANING THE GREASE FILTER- Fig. 1
1. Unplug the appliance or switch off the mains power supply. 2. Pull out the steam deflector (a). 3. Open the extractor grille (b, c). 4. Remove the device fixing the grease filter (d). 5. Remove the dirty grease filter. 6. After replacing or cleaning the grease filter (depends on model), remount in reverse order, making sure the entire extraction surface is covered. 1. Unplug the appliance or switch off the mains power supply. 2. Pull out the steam deflector (a). 3. Open the extractor grille (b, c). 4. Remove the burnt-out bulb. Only 40W max E14 bulbs should be used. 5. Remount the extractor grille.
h f
Fig. 2
g
REPLACING BULBS - Fig. 1
AKG 751 AKG 753
MOUNTING OR RENEWING THE CARBON FILTER - Fig. 2 - 3
1. Unplug the appliance or switch off the mains power supply. 2. Pull out the steam deflector (a). 3. Open the extraction grille (b, c). 4. Fitting: position the carbon filter over the motor protection grille within the reference marks (f) - the reference mark (g) on the edge of the carbon filter should line up with the arrow on the fan shroud (h), and turn clockwise. Removing: turn anti-clockwise. 5. Remount the extractor grille. 5019 100 75050
Fig. 3
D
GB
F
NL
E
P
I
GR
|
