WHIRLPOOL AKR 619 WH
Skrócona Instrukcja Obsługi

AKR419-420-425-426-427-428-429-430-601 AKR619-620-624-625-626-627-628-629-720

PRODUCT DESCRIPTION SHEET CONTROL PANEL
A. Light switch. B. Speed selector switch.

1. 2. 3. 4. 5.

Control panel Grease filters (behind the extractor grille) Lighting unit (not present in AKR 427-627-720) Pull-out steam deflector Halogen bulbs (AKR 427-627-720 only)

Removing and renewing or washing the grease filter:
1. Unplug the appliance or disconnect the mains power supply. 2. Pull out the steam deflector (Fig.1, a). 3. Open the extractor grille (Fig.1, b-c-d). 4. Remove the device securing the grease filter (Fig. 2, e or Fig. 3, e). 5. Remove the dirty grease filter. 6. After the grease filter has been renewed or cleaned (depending on model), remount in reverse order, making sure the entire extraction surface is covered.

small amount of steam and fumes medium amount of steam and fumes large amount of steam and fumes large amount of steam and fumes

Fitting or renewing the carbon filter:
1. Unplug the appliance or disconnect the mains power supply. 2. Pull out the steam deflector. 3. Open the extractor grille. 4. If the carbon filter is already fitted and needs renewing, press the release buttons (Fig. 4, h) and pull the filter out downwards. 5. If the filters are not already fitted (Fig. 4). f. Locate the carbon filter on the back rings. g. Secure the filter in front with the clips (h) provided with it. 6. Refit the extractor grille.

Fig. 2

Fig. 1

Replacing bulbs
1. Unplug the appliance or disconnect the mains power supply. 2. Pull out the steam deflector. 3. Open the extractor grille. 4. Remove the burnt-out bulb. Replace using 40W max E14 bulbs or 20W max GU5.3 halogen bulbs only (models AKR 427-627-720 only) or 9W (PL) bulbs (models AKR 419-426-619-626 only). 5. Refit the extractor grille.

Fig. 3

Fig. 4



5019 100 75142

S

N

DK FIN GB