|
Dla tego produktu nie napisano jeszcze recenzji!
31055020aGB.fm Page 25 Monday, July 31, 2006 6:41 PM
3. Lift the bottom of the inside sheet of glass and remove it (fig. 6)
6
4. Slip out the second and the third sheet of glass, paying particular attention to the position of the word SAFEGLASS (Fig. 7)
7
5. Refit the sheets of glass in reverse order making sure that: - The word SAFEGLASS on the intermediate sheets is facing upwards so as to be correctly legible (fig. 8); - if one of the intermediate sheets does not have the word SAFEGLASS it must be inserted in the position closest to the internal glass. Put the inside glass into position with the word SAFEGLASS facing the top of the door. (fig. 6) Reposition and screw on the two glass supports A (fig. 4 and fig. 5) Note: a slight play between the inside glass and the door uprights is to be considered normal as it compensates expansion of the glass caused by heat. To remount the door: 6. Insert the hinges into their grooves and lower the door fully (fig. 3) 7. Lower the two catches again (fig. 2) 8. Close the oven door fully.
8
9
25
|
