SHARP AM-400DE
Instrukcja Serwisowa

AM-400DE
11. Quick setup guide

1
For detailed instructions on setting up and using the AM-400, see the online guide on the CD-ROM. To open the guide, double-click the Manual folder on the CD-ROM, double-click English, and then doubleclick Online Manual.pdf. (Note: Acrobat Reader 5.05 or higher is required to view the manual.To install Version 5.05, double-click Acrobat Reader, English, and then ar505enu.exe on the CD-ROM.)
All company names and product names appearing in this setup guide are the trademarks of their respective owners.

Make sure you have the following items. If any are missing, contact your dealer or retailer.
Note: The shape of the line cord plug varies by country. An adapter (not shown) is provided in some countries.
Telephone line Toner cord cartridge Drum cartridge

2

Attach the trays.

Output tray

Document feeder tray

Setup Guide

CD-ROM

When the tray stops, lift the end slightly and push in.

3

Important: Pull the scanner release toward you to release the scanner lock. Caution: Be sure to release the scanner lock before plugging in the power cord.

4

Plug the power cord into a standard, earthed power outlet. Note: The power outlet must be installed near the equipment and must be easily accessible.

5

Connect the phone line cord to the TEL. LINE jack and a wall jack.
Italy: Use the provided adapter to connect the line cord to the wall socket.

Note: The shape of the power plug varies by country

Note: The shape of the line cord plug varies by country.

TEL. LINE TEL. SET

6

Install the toner cartridge and drum cartridge.
1. Press ı1 . Open the side cover ı2 and then the front cover ı3 .

2. Remove the drum cartridge from its packaging.

3. Insert the drum cartridge, sliding it along the guides.

1

4. Remove the toner cartridge from its packaging. Shake the cartridge side to side four or five times to distribute the toner evenly within the cartridge.

3

2

Caution! Do not touch the fusing unit under the side cover after the machine has been in operation, as it may become very hot.

Grasp this handle to push the cartridge in

5. Insert the toner cartridge, sliding it along the guides until it clicks into place.

6. Close the front cover ı1 and then the side cover ı2 . �

7. Press then press

to select "YES" and

8. Reset the drum cartridge counter: a.Press
A MENU

. (This resets

once and then

Z

or

the toner cartridge counter.)
until "LIFE" appears in the
Display:
TONER EXCHANGED?
2

display. b. Press c. Press and then .

Press on the arrow mark to make sure the cartridge clicks into place

1

repeatedly to exit.

1:YES, 2:NO

7

Load paper. 1. Remove the output tray.
2. Insert a stack of paper into the tray, print side up.
The stack should not be higher than this line

8

Set the date and time that appear in the fax mode display.
5. Enter a two-digit number for the hour (00 to 23) and a two-digit number for the minute (00 to 59). Example: 9:25 6. Press 7. Press
Z
ENTER

1. In the date and time display of fax mode (press
FAX

if needed to select fax
MENU

mode), press

,

,

.

2. Enter a two-digit number for the day ("01" to "31"). Example: the 5th

.

repeatedly to exit.

3. Squeeze the sides of the paper guide and slide it to the slot for the length of paper loaded.

4. Replace the output tray.

�

To clear a mistake press

.

3. Enter a 2-digit number for the month. Example: February 4. Enter the year (four digits) Example:

1 � 15