Installation
Note:
� Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work properly. � Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. � Consult with your nearest dealer if installation requires the drilling of holes or other modifications to the vehicle. � Install the unit where it does not get in the driver�s way and cannot injure the passenger if there is a sudden stop, like an emergency stop. � Install the antenna on as flat a place as possible. � Do not paint the antenna, as this may affect its performance. � Do not remove the rubber sheet from the antenna bracket. � Do not place things such as magnetic cards close to the antenna because its magnet is strong. � The antenna may be less sensitive when it is snowing. � When installing the antenna with the antenna bracket, be careful to tighten the screws firmly. After installing, recheck every once in a while that all screws are tight. � When installing the antenna with magnet, be careful not to scratch the vehicle body. � When you use the antenna installed with magnet, detach the antenna and put it inside the vehicle every time before entering a car wash system. If it is left on the outside it may be knocked off and scratch the vehicle body.
Owner�s Manual
AN-90XM
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, California 90801, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia TEL: (03) 9586-6300 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. San Lorenzo 1009 3er. Piso Desp. 302 Col. Del Valle Mexico, D.F. C.P. 03100 TEL: 5-688-52-90
