SHARP AR-C280
Instrukcja Serwisowa

�修�������
�場�����修����庫管����正����������������������� A��� : ��頻度��������庫���������� B��� : ��頻度����������庫���������� C��� : ��頻度���������������� D��� : ��頻度�������������������� E��� : ���������������������庫�����奨������ S��� : ��� �����������������������������������使����������A�B ��������� ���� : ��製��������������������製���������������� A��� : 常��転������������������使�����転�������������形��������������� ��������� B��� : �転���使����������度�����������

DEFINITION
The definition of each Rank is as follows and also noted in the list A: Parts necessary to be stocked as High usage parts. B: Parts necessary to be stocked as Standard usage parts. C: Low usage parts. D: Parts necessary for refurbish. E: Unit parts recommended to be stocked for efficient after sales service. Please note that the lead time for the said parts may be longer than normal parts. S: Consumable parts. Please note that the following parts used in Copier under the same description are classified into A or B Rank depending upon the place used. Example : Gear made of Metal, Sprocket, Bearing, Belt made of Rubber, Spring clutch mechanism. ARank : The parts which may be with the revolution or loading. BRank : Parts similar to A Rank parts, but are not included in Rank A.
����信頼�確����������正������使����� ! �����������������交�������������維�������������使�����

Because parts marked with "!" is indispensable for the machine safety maintenance and operation, it must be replaced with the parts specific to the product specification. F F F F
������������������以����������� ( �路��� ) �����������������

Other than this Parts Guide, please refer to documents Service Manual(including Circuit Diagram)of this model. Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order. For U.S. only-Use order codes provided in advertising literature. Do not order from parts department.

For compatibility of parts, No.1-6 is specified in column of "COMPATIBLE" in the Parts List, The contents of No.1-6 are as follows: [Interchange] 1: Interchangeable. 2: Current type can be used in place of new type. New type cannot be used in place of current type. 3: Current type cannot be used in place of new type. New type can be used in place of current type. 4: Not interchangeable. 5: Interchangeable if replaced with same types of related parts in use. 6: Others.

�2�